SWAMPy

✎ CARVE FLESH

EDITING: cmdline.py

# Copyright (C) 2013-2014 Canonical Ltd.
#
# Author: Scott Moser <scott.moser@canonical.com>
# Author: Blake Rouse <blake.rouse@canonical.com>
#
# This file is part of cloud-init. See LICENSE file for license information.

import abc
import base64
import glob
import gzip
import io
import logging
import os
import shlex

from cloudinit import util
from cloudinit.net import get_devicelist, read_sys_net_safe

_OPEN_ISCSI_INTERFACE_FILE = "/run/initramfs/open-iscsi.interface"

KERNEL_CMDLINE_NETWORK_CONFIG_DISABLED = "disabled"

LOG = logging.getLogger(__name__)

class InitramfsNetworkConfigSource(metaclass=abc.ABCMeta):
    """ABC for net config sources that read config written by initramfses"""

@abc.abstractmethod
    def is_applicable(self) -> bool:
        """Is this initramfs config source applicable to the current system?"""

@abc.abstractmethod
    def render_config(self) -> dict:
        """Render a v1 network config from the initramfs configuration"""

class KlibcNetworkConfigSource(InitramfsNetworkConfigSource):
    """InitramfsNetworkConfigSource for klibc initramfs (i.e. Debian/Ubuntu)

Has three parameters, but they are intended to make testing simpler, _not_
    for use in production code.  (This is indicated by the prepended
    underscores.)
    """

def __init__(self, _files=None, _mac_addrs=None, _cmdline=None):
        self._files = _files
        self._mac_addrs = _mac_addrs
        self._cmdline = _cmdline

# Set defaults here, as they require computation that we don't want to
        # do at method definition time
        if self._files is None:
            self._files = _get_klibc_net_cfg_files()
        if self._cmdline is None:
            self._cmdline = util.get_cmdline()
        if self._mac_addrs is None:
            self._mac_addrs = {}
            for k in get_devicelist():
                mac_addr = read_sys_net_safe(k, "address")
                if mac_addr:
                    self._mac_addrs[k] = mac_addr

def is_applicable(self) -> bool:
        """
        Return whether this system has klibc initramfs network config or not

Will return True if:
            (a) klibc files exist in /run, AND
            (b) either:
                (i) ip= or ip6= are on the kernel cmdline, OR
                (ii) an open-iscsi interface file is present in the system
        """
        if self._files:
            for item in shlex.split(self._cmdline):
                if item.startswith(("ip=", "ip6=")):
                    return True
            if os.path.exists(_OPEN_ISCSI_INTERFACE_FILE):
                # iBft can configure networking without ip=
                return True
        return False

def render_config(self) -> dict:
        return config_from_klibc_net_cfg(
            files=self._files,
            mac_addrs=self._mac_addrs,
        )

_INITRAMFS_CONFIG_SOURCES = [KlibcNetworkConfigSource]

def _klibc_to_config_entry(content, mac_addrs=None):
    """Convert a klibc written shell content file to a 'config' entry
    When ip= is seen on the kernel command line in debian initramfs
    and networking is brought up, ipconfig will populate
    /run/net-<name>.cfg.

The files are shell style syntax, and examples are in the tests
    provided here.  There is no good documentation on this unfortunately.

DEVICE=<name> is expected/required and PROTO should indicate if
    this is 'none' (static) or 'dhcp' or 'dhcp6' (LP: #1621507) or 'static'
    or 'off' (LP: 2065787). Note that IPV6PROTO is also written to address
    the possibility of both ipv4 and ipv6 getting addresses.

Full syntax is documented at:
    https://git.kernel.org/pub/scm/libs/klibc/klibc.git/plain/usr/kinit/ipconfig/README.ipconfig
    """

if mac_addrs is None:
        mac_addrs = {}

data = util.load_shell_content(content)
    try:
        name = data["DEVICE"] if "DEVICE" in data else data["DEVICE6"]
    except KeyError as e:
        raise ValueError("no 'DEVICE' or 'DEVICE6' entry in data") from e

# ipconfig on precise does not write PROTO
    # IPv6 config gives us IPV6PROTO, not PROTO.
    proto = data.get("PROTO", data.get("IPV6PROTO"))
    if not proto:
        if data.get("filename"):
            proto = "dhcp"
        else:
            proto = "none"

if proto in ("static", "off"):
        proto = "none"

if proto not in ("none", "dhcp", "dhcp6"):
        raise ValueError("Unexpected value for PROTO: %s" % proto)

iface = {
        "type": "physical",
        "name": name,
        "subnets": [],
    }

if name in mac_addrs:
        iface["mac_address"] = mac_addrs[name]

# Handle both IPv4 and IPv6 values
    for pre in ("IPV4", "IPV6"):
        # if no IPV4ADDR or IPV6ADDR, then go on.
        if pre + "ADDR" not in data:
            continue

# PROTO for ipv4, IPV6PROTO for ipv6
        cur_proto = data.get(pre + "PROTO", proto)
        # ipconfig's 'none' is called 'static'
        if cur_proto == "none":
            cur_proto = "static"
        subnet = {"type": cur_proto, "control": "manual"}

# only populate address for static types. While the rendered config
        # may have an address for dhcp, that is not really expected.
        if cur_proto == "static":
            subnet["address"] = data[pre + "ADDR"]

# these fields go right on the subnet
        for key in ("NETMASK", "BROADCAST", "GATEWAY"):
            if pre + key in data:
                subnet[key.lower()] = data[pre + key]

dns = []
        # handle IPV4DNS0 or IPV6DNS0
        for nskey in ("DNS0", "DNS1"):
            ns = data.get(pre + nskey)
            # verify it has something other than 0.0.0.0 (or ipv6)
            if ns and len(ns.strip(":.0")):
                dns.append(data[pre + nskey])
        if dns:
            subnet["dns_nameservers"] = dns
            # add search to both ipv4 and ipv6, as it has no namespace
            search = data.get("DOMAINSEARCH")
            if search:
                if "," in search:
                    subnet["dns_search"] = search.split(",")
                else:
                    subnet["dns_search"] = search.split()

iface["subnets"].append(subnet)

return name, iface

def _get_klibc_net_cfg_files():
    return glob.glob("/run/net-*.conf") + glob.glob("/run/net6-*.conf")

def config_from_klibc_net_cfg(files=None, mac_addrs=None):
    if files is None:
        files = _get_klibc_net_cfg_files()

entries = []
    names = {}
    for cfg_file in files:
        name, entry = _klibc_to_config_entry(
            util.load_text_file(cfg_file), mac_addrs=mac_addrs
        )
        if name in names:
            prev = names[name]["entry"]
            if prev.get("mac_address") != entry.get("mac_address"):
                raise ValueError(
                    "device '{name}' was defined multiple times ({files})"
                    " but had differing mac addresses: {old} -> {new}.".format(
                        name=name,
                        files=" ".join(names[name]["files"]),
                        old=prev.get("mac_address"),
                        new=entry.get("mac_address"),
                    )
                )
            prev["subnets"].extend(entry["subnets"])
            names[name]["files"].append(cfg_file)
        else:
            names[name] = {"files": [cfg_file], "entry": entry}
            entries.append(entry)

return {"config": entries, "version": 1}

def read_initramfs_config():
    """
    Return v1 network config for initramfs-configured networking (or None)

This will consider each _INITRAMFS_CONFIG_SOURCES entry in turn, and return
    v1 network configuration for the first one that is applicable.  If none are
    applicable, return None.
    """
    for src_cls in _INITRAMFS_CONFIG_SOURCES:
        cfg_source = src_cls()

if not cfg_source.is_applicable():
            continue

return cfg_source.render_config()
    return None

def _decomp_gzip(blob):
    # decompress blob or return original blob
    with io.BytesIO(blob) as iobuf:
        gzfp = None
        try:
            gzfp = gzip.GzipFile(mode="rb", fileobj=iobuf)
            return gzfp.read()
        except IOError:
            return blob
        finally:
            if gzfp:
                gzfp.close()

def _b64dgz(data):
    """Decode a string base64 encoding, if gzipped, uncompress as well

:return: decompressed unencoded string of the data or empty string on
       unencoded data.
    """
    try:
        blob = base64.b64decode(data)
    except (TypeError, ValueError):
        LOG.error(
            "Expected base64 encoded kernel command line parameter"
            " network-config. Ignoring network-config=%s.",
            data,
        )
        return ""

return _decomp_gzip(blob)

def read_kernel_cmdline_config(cmdline=None):
    if cmdline is None:
        cmdline = util.get_cmdline()

if "network-config=" in cmdline:
        data64 = None
        for tok in cmdline.split():
            if tok.startswith("network-config="):
                data64 = tok.split("=", 1)[1]
        if data64:
            if data64 == KERNEL_CMDLINE_NETWORK_CONFIG_DISABLED:
                return {"config": "disabled"}
            return util.load_yaml(_b64dgz(data64))

return None

CANCEL

Name	Type	Size	Modified	Actions
↩ ..	DIR	—	—
📁 __pycache__/	DIR	—	2026-03-17 03:54
📁 netops/	DIR	—	2026-03-17 03:54
📄 __init__.py	PY	42.4 KB	2025-09-26 11:09	EDIT
📄 activators.py	PY	11.4 KB	2025-09-26 11:09	EDIT
📄 bsd.py	PY	8.5 KB	2025-09-26 11:09	EDIT
📄 cmdline.py	PY	9.1 KB	2025-09-26 11:09	EDIT
📄 dhcp.py	PY	36.2 KB	2025-09-26 11:09	EDIT
📄 eni.py	PY	25.1 KB	2025-09-26 11:09	EDIT
📄 ephemeral.py	PY	21.5 KB	2025-09-26 11:09	EDIT
📄 freebsd.py	PY	3.7 KB	2025-09-26 11:09	EDIT
📄 netbsd.py	PY	1.4 KB	2025-09-26 11:09	EDIT
📄 netplan.py	PY	23.3 KB	2025-09-26 11:09	EDIT
📄 network_manager.py	PY	24.6 KB	2025-09-26 11:09	EDIT
📄 network_state.py	PY	36.5 KB	2025-09-26 11:09	EDIT
📄 networkd.py	PY	23.8 KB	2025-09-26 11:09	EDIT
📄 openbsd.py	PY	2.5 KB	2025-09-26 11:09	EDIT
📄 renderer.py	PY	1.6 KB	2025-09-26 11:09	EDIT
📄 renderers.py	PY	1.6 KB	2025-09-26 11:09	EDIT
📄 sysconfig.py	PY	44.7 KB	2025-09-26 11:09	EDIT
📄 udev.py	PY	1.4 KB	2025-09-26 11:09	EDIT